Clearing Paper Jams Caused By A Wrong Paper Size Setting - Oki ES9476 MFP Hardware Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
13 Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the finisher when closing it.
They could be caught and this could injure you.
14 Close the front cover of the finisher.
 Clearing paper jams caused by a wrong paper size setting
Paper jams occur when there is a mismatch between the size of the paper in a tray or the MPT and the size registered
for the corresponding tray or the MPT in the equipment. The message "Check paper size setting on control panel for
tray N. Check the direction or size of the paper." or "Check paper size setting on control panel for MPT. Check the
direction or size of the paper." appears on the touch panel.
In this case, just clearing the jammed paper does not prevent another paper from being jammed. Be sure to follow the
procedure below.
Troubleshooting differs depending on how the paper jam has occurred:
 P.56 "Jam when making copies or prints (using a tray)"
 P.58 "Jam when making copies or prints (using the MPT)"
 P.59 "Jam when printing from the Fax"
Clearing a Paper Jam 55