8) For The Entire Monochrome Print, It Does Not Being Printed; For The Entire Monochrome Print, It Does Not Being Printed; Setting By Mistake Of The Specific Color Print Menu - Oki C810 Maintenance Manual

Oki Data CONFIDENTIAL
7.5.3.(8)

For the entire monochrome print, it does not being printed.

(8-1) Setting by mistake of the specific color print menu

Check item
(8-1-1) Status of specific color print menu
Boot Menu item Check if the set value item of "Process Setup" of
Boot Menu is the setting of "Full Color". (About
Boot Menu, refer to Section 5.6)
44015503TH Rev. 1
Action to be taken
Check work
at NG
Setting
alteration for
"Full Color"
7. TROUBLESHOOTING PROCEDURE
Charge roller
Ground
Developer roller
Toner feed roller
Figure 7-3
217 /