Ecoprint Mode - Kyocera Mita FS-1050 Operation Manual

Using the Operator Panel
EcoPrint
EcoPrint allows you to reduce the amount of toner the printer uses per
page. This helps save on printing costs. You can activate EcoPrint as
follows. (The default is Off.)
The EcoPrint mode setting is On when the printing image becomes lighter,
yet stays very readable.
The EcoPrint setting has no effect on the print speed.
Note
1
Press the MENU key.
2
Press the
Print Quality
3
Press the > key.
4
Press the
>EcoPrint Mode
Off
5
Press the ENTER key. A blinking question mark (?) appears.
>EcoPrint Mode
? Off
6
Select On or Off using the
If you want to abandon this procedure, press the CANCEL key.
EcoPrint is Off
(default).
or key until Print Quality > appears.
>
or key until >EcoPrint Mode appears.
or
1-46
EcoPrint is On
key.