Kyocera Mita FS-1050 Operation Manual page 42

Using the Operator Panel
5
Press the ENTER key. A blinking question mark (?) appears.
>>?I000
6
Press the or
the numbers of internal fonts, see
If you want to abandon this procedure, press the CANCEL key.
7
When the desired font is displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
Selecting a Courier/Letter Gothic Type
The Courier and Letter Gothic font can be either Regular or Dark. For
example, to change the Courier type, proceed as follows:
1
Press the MENU key.
2
Press the or
Font
3
Press the > key. Press the
appears.
>Font Select
Internal
4
Make sure that Internal is displayed and press the > key.
5
Press the or
>>Courier
Regular
key until the desired font number appears. For
List of Fonts List of Fonts List of Fonts List of Fonts
key until Font > appears.
>
or
>
key until >>Courier appears.
1-32
A-3 A-3 A-3 A-3
on page
key until > Font Select >
.