Kyocera Mita FS-1050 Operation Manual page 15

Note
Key Key
Key Key
• Switches the printer online and offline (even offline, the printer can receive data).
• Cancels specific errors.
GO
• Cancels a printing job.
To cancel, proceed as follows:
1 1 1 1 Make sure if Processing appears on the message display.
2 2 2 2 Press the CANCEL key.
3 3 3 3 Print Cancel? appears on the message display and then interface to be canceled.
Parallel
USB
Serial (appears only when an optional serial interface is present)
CANCEL
Option (appears only when an optional network interface card is installed)
Press the CANCEL key again if you wish to stop the cancellation of printing.
4 4 4 4 Select the interface to cancel using the
from the selected interface will stop. Cancelling data appears in the message display and
printing stops after the current page is printed.
• Resets numeric values or cancels setting procedures.
• When pressed during mode selection, it ends the setting and the printer returns to the Ready
condition.
MENU • Used to select the emulation, font, character code set; to read a memory card; and more.
Used to access desired items or input numeric values. In some control procedures, the < and >
keys are used to access or exit submenu items.
Used to access desired items or input numeric values. In some control procedures, the < and >
keys are used to access or exit submenu items.
Used as the < key in mode selection.
• Used as the > key in the mode selection function.
• Displays online help messages on the message display when paper jam errors occur. When
pressed in the Ready condition, displays explanations of online help messages. When pressed
while the online help is displayed, cancels the online help.
Confirms numeric values and other selections.
ENTER
Keys
The operator panel keys are used to configure the printer. Note the certain
keys have the secondary function.
Settings made with these keys affect only the interface currently in use.
Function Function
Function Function
or key and then press the ENTER key. Printing
1-5
Understanding the Operator Panel
MENU
CANCEL
ENTER
GO