Table of Contents
Advertisement
8
Press the > key. Each time the
changes as shown below.
>>DHCP
On
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
9
Display the item to be set and press the ENTER key.
For DHCP , a question mark (?) appears. For IP Address, Subnet
Mask, and Gateway, the cursor (_) blinks.
10
For DHCP , select On or Off using the
Subnet Mask and Gateway addresses, press
the number (000 to 255) where the cursor is blinking. You can use
the > and < keys to move the cursor right and left.
To obtain these addresses, consult your network administrator.
11
Press the ENTER key.
12
Press the MENU key. The message display returns to Ready.
or
1-23
Using the Operator Panel
key is pressed, the item
or
key. For IP Address,
or
key to change
Advertisement
Table of Contents
