Table of Contents
Advertisement
Received Data Dumping
To debug programs and files, you can print data as hexadecimal code as
shown below.
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
>Print HEX-DUMP
5
Press the ENTER key. A question mark (?) appears.
>Print HEX-DUMP?
6
Press the ENTER key again. Processing appears for a second, and
then Waiting appears.
Processing
Waiting
7
Send data to be dumped to the printer. The message Processing is
displayed while it is receiving the data.
Once the dumped data you require has been output, it is possible to
cancel the printing of any further dumped data by taking the printer
offline. Do so by pressing the GO key and then the CANCEL key.
8
Once all data has been received, the message Waiting appears.
Press the GO key to finish printing.
key until Others > appears.
>
key until > Print HEX-DUMP appears.
1-81
Using the Operator Panel
Advertisement
Table of Contents
