Changing The Emulation - Kyocera Mita FS-1050 Operation Manual

Changing the Emulation

The emulation mode for the current interface can be changed from this
menu.
1
Press the MENU key.
2
Press the or
emulation names shown below appears, indicating the current
emulation.
PCL 6 (default)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
3
Press the ENTER key. A blinking question mark (?) appears.
Emulation
?PCL 6
4
Press the or
If you want to abandon this procedure, press the CANCEL key.
5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
key until Emulation appears. One of the
key until the desired emulation mode appears.
1-27
Using the Operator Panel