Kyocera Mita FS-1050 Operation Manual page 35

6
Press the > key, then the
indicates >Opt. StatusPage.
>Opt. StatusPage
Off
7
The default is Off. If it is On, change it as follows.
Press the ENTER key. A blinking question mark (?) appears.
>Opt. StatusPage
? On
8
Select Off using the
>Opt. StatusPage
? Off
9
Press the ENTER key again.
>Opt. StatusPage
Off
10
Press the MENU key. The message display returns to Ready.
or key until the message display
or key.
1-25
Using the Operator Panel