Copier Management; Using The Copier Management Mode - Kyocera Mita KM-4530 Service Manual

1-4-1 Copier management

This copier is equipped with the maintenance mode for service personnel and the management mode that can be used also
by users (mainly by copier administrator). In this copier management mode, settings such as default settings can be
changed.

(1) Using the copier management mode

Start
Press the * (Default setting) key.
Press the [Management] key.
Enter the
management code.
Press the [Weekly timer]
([Week timer]) key.
Enter the
management code.
Press the [Copy default] key.
Enter the
management code.
Press the [Machine default] key.
Enter the
management code.
Press the [Bypass setting] key.
Enter the
management code.
Press the [Document
management] key.
Enter the
management code.
Press the [BOX management]
([Hard Disk management]) key.
Enter the
management code.
Press the [Print Form] key.
Press the [Language] key.
Execute department manage-
ment items (page 1-4-2).
Press the [Close] key.
Make weekly timer settings
(page 1-4-2).
Press the [Close] key.
Make copy default settings
(page 1-4-3).
Press the [Close] key.
Make machine default settings
(page 1-4-5).
Press the [Close] key.
Make bypass settings
(page 1-4-6).
Press the [Close] key.
Make document management
default settings (page 1-4-6).
Press the [Close] key.
Execute hard disk management
items (page 1-4-7).
Press the [Close] key.
Output the setting list
(page 1-4-7).
Press the [Close] key.
Set the language (page 1-4-7).
2BC/D
End
1-4-1