Rs-232C/Rs-422A Protocol - Kyocera Mita FS-1050 Operation Manual

RS-232C/RS-422A Protocol

C.4 RS-232C/RS-422A Protocol
A protocol is a set of rules the computer follows in sending data to the
printer. The RS-232C/RS-422A parameters are stored in battery backed-up
memory. They are indicated on the status printout. They can be changed by
the FRPO (firmware reprogram) command described in the
Manual Manual
Manual Manual provided on the CD-ROM supplied with the printer. The
parameters and their identification codes are given below.
H1: Baud rate H1: Baud rate H1: Baud rate H1: Baud rate
Parameter value Parameter value
Parameter value Parameter value
12
24
48
96
19
38
57
11
The factory setting is 9600 baud.
H2: Data bits H2: Data bits
H2: Data bits H2: Data bits
7 or 8, factory-set to 8.
H3: Stop bits H3: Stop bits H3: Stop bits H3: Stop bits
1 or 2, factory-set to 1.
H4: Parity H4: Parity H4: Parity H4: Parity
Parameter value Parameter value
Parameter value Parameter value
0
1
2
3
The factory setting is "None" (0 on the status printout).
Baud rate Baud rate
Baud rate Baud rate
1200
2400
4800
9600
19200
38400
57600
115200
Meaning Meaning
Meaning Meaning
None
Odd
Even
Ignore
C-9
Programming Programming
Programming Programming