Kyocera Mita FS-1050 Operation Manual page 61

Table of Contents

Advertisement

DataS001 (first data), DataS002 (second data),
DataS003 (third data)...
In the example above, if the file
written onto the memory card, the destination name will be
DataS001 .
As the printer receives data, the message display changes to
Processing, then when the end of the data is received, the message
display changes to Waiting.
8
Make sure that the message display changes to Waiting, then press
the GO key. This has the effect of writing the file into the memory
card and instructs the printer to print a memory card WRITE
INFORMATION page as shown below.
Partition Type. Type of data written (currently only type 2 is supported).
Partition Type
Partition Type
Partition Type
Partition Name. The destination name of data written on the card.
Partition Name
Partition Name
Partition Name
Write Partition Length. The size of the data written on the memory card.
Write Partition Length
Write Partition Length
Write Partition Length
Others. Error information.
Others
Others
Others
After the memory card WRITE INFORMATION page is printed, the
message display returns to Ready.
If the writing procedure is not successfully completed, an error code
appears on the message display. For details, see section
Messages
Messages
Messages
Messages
on page
message display returns to Ready.
9
Repeat the steps above until you have transferred all the data (files)
you want to write on the memory card. Each time you finish writing
data, a memory card Write Information page is printed, which
contains the information explained in
only to the data just written. To see all data contained in the memory
card at once, print a list of data names as explained on page
Printing a List of Data Names
Printing a List of Data Names
Printing a List of Data Names
Printing a List of Data Names
TEST.TXT is the first data to be
4-9
4-9
4-9
4-9
. If this happens, press the GO key. The
.
1-51
Using the Operator Panel
4.3.3 Errors
4.3.3 Errors
4.3.3 Errors
4.3.3 Errors
step 8
step 8
step 8
step 8
above, but pertaining
1-54
1-54
1-54
1-54
,

Advertisement

Table of Contents
loading

Table of Contents