Administering The Dhcp Server; Dhcp Generic Setup - Avaya 9608 Administrator's Manual

Parameter
TLSSRVRID
UNNAMEDSTAT
VLANTEST
These parameters are saved in the non-volatile memory of the 9600 Series IP Deskphones. If the
DHCP server is not available for any reason during phone restart or reboot, the phone uses these
saved parameters.

Administering the DHCP server

This document describes how to administer a single LAN segment, which is the simplest
configuration. But you can use the same information for more complex LAN configurations.
Caution:
Before you start, understand your current network configuration. An improper installation might
cause network failures or reduce the reliability and performance of your network.

DHCP generic setup

This document describes the generic DCHPv4 and DHCPv6 administration that works with the 9600
Series IP Deskphones.
Windows operating systems include several DHCP software alternatives such as:
®
• Windows NT
• Windows 2000
• Windows 2003
Any DHCP application might work if the DHCP server is correctly configured.
Note:
Avaya does not assume responsibility for configuring your DHCP server. Contact your vendor or
supplier for configuring the DHCP server correctly.
June 2014
Description
Specifies that Transport Layer Security is used to authenticate the server.
Controls whether the identity of a TLS server is checked against its certificate.
Specifies whether the deskphone will attempt unnamed registration.
Controls the length of time the deskphone tries DHCP with a non-zero VLAN ID.
When the interval is exceeded, the deskphone records the VLAN ID so that the
VLAN ID is not used again, and DHCP continues on the default VLAN. The default
is 60 seconds.
4.0 DHCP Server
®
DHCP Server
®
DHCP Server
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
Comments? infodev@avaya.com
Administering the DHCP server
53