Avaya 9608 Administrator's Manual page 87

Parameter name
SLMTEST
SSH_ALLOWED
SSH_BANNER_FILE
SSH_IDLE_TIMEOUT
SSH_LOCKOUT_ATTEMPT
S
SSH_LOGIN_DELAY
SSH_USERNAME
SSO_ENABLED
SSO_CLIENT_CERT
June 2014
Default value Description and value range
Specifies whether the SLA Monitor agent will be enabled.
50012 Valid values are 6000 - 65535
Specifies the UDP ports used for RTP and traceroute
tests.
2 Secure Shell (SSH) Protocol permission flag. (0=SSH is
not supported, 1= SSH is supported). "Supporting SSH"
means the Avaya Services organization can have remote
access to the deskphone, using SSHv2, as described in
topic Secure Shell Support.
When value =2, SSH will still be disabled by default (i.e.,
the SSH server listen port will be closed), but SSH will be
able to be manually enabled (or disabled if it was
previously manually enabled) from the Craft Debug
procedure.
" " (Null) Specifies the file name or URL for a custom SSH banner
file. Zero to 255 ASCII characters: zero or one file name or
URL. Used to provide a security warning message to the
client before SSH authentication is attempted.
If the parameters is left at the default value, the default
banner message is as stated in the topic Secure Shell
Support.
10 Specifies the number of minutes of inactivity after which
SSH will be disabled. Valid values are 1 to 5 ASCII
numeric digits, zero through 32767.
0 Specifies the number of failed login attempts after which
SSH will be disabled. Valid values are 1 to 5 ASCII
numeric digits, zero through 32767.
60 Specifies the number of seconds of delay between login
attempts if three or more attempts fail. Valid values are 1
to 5 ASCII numeric digits, zero through 32767.
"craft" Specifies the user name to be used for SSH logins. Valid
values are 0 to 255 ASCII characters.
0 Specifies whether Single Sign (SSO) on capability is
enabled or disabled. Valid values are:
0= Default , SSO disabled. 1=SSO enabled.
0 Specifies whether the telephone will request and
authenticate an identity certificate from the desktop
computer during the TLS handshake for SSO. Valid values
are:
0= Default value, specifies that the telephone will not
request a certificate from the desktop computer. 1= the
telephone will request and authenticate an identity
certificate from the desktop computer during the TLS
handshake.
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
Comments? infodev@avaya.com
9600 Series H.323 customizable system parameters
87