Avaya 9608 Administrator's Manual page 110

Administering Deskphone Options
application softkey when the highlighted call appearance is in the associated call state. The
deskphone displays the feature buttons starting with Softkey 1 and continuing to the right in the
order specified in the system parameter, subject to the availability of features and softkeys as
listed in this section.
Example:
Consider a scenario where call server administration includes the Send All Calls and Directory
features. If the system parameter IDLEFEATURES is not administered, the corresponding
softkeys are labeled from left to right as follows when a highlighted call appearance is Idle:
Redial
However, when the system parameter IDLEFEATURES is administered to be "26,1000,35" the
corresponding softkeys are labeled from left to right as follows when a highlighted call
appearance is Idle:
Directory
Softkeys available to be labeled with feature buttons as indicated under Available Softkeys in the
chart are those that are not dedicated to a higher priority function. For example, in the "Active with a
talk path" call state, the softkeys for Hold, Conference, and Transfer are dedicated to those
functions and cannot be displaced by an administrable feature button, while the softkey normally
labeled Drop (softkey #4) can be used for an administrable feature button.
In addition to the administrable feature numbers listed in
Softkeys on page 111, you can specify three additional features on a softkey of your choice or can
completely replace the existing features. In the case of the system parameters IDLEFEATURES or
DIALFEATURES, if the list of feature numbers includes the value 1000, the corresponding softkey is
reserved for the Redial feature local to the deskphone. This means the corresponding softkey is
labeled Redial if the deskphone has at least one phone number stored for the Redial feature.
Otherwise the softkey is unlabeled. In the case of the system parameter IDLEFEATURES, if the list
of feature numbers includes the value 1100, the corresponding softkey is reserved for a Backlight
Off icon. When you press this softkey, the backlight of the deskphone turns off, saving energy. The
backlight is turned on automatically when an phone activity is detected, such as an incoming call or
a button press by the user.
If the list of feature numbers includes the value 1200, the corresponding softkey is reserved for a
Log Off button, regardless of the value of OPSTAT. When pressed, this softkey presents the Log
Out Confirmation Screen, and the user can either confirm the logout process, or cancel it and return
to the Phone Screen.
For IDLEFEATURES or DIALFEATURES, if the system parameter PHNEMERGNUM is
administered, the third softkey in the Idle or Dialing call state will always be labeled Emerg
regardless of the contents of those system parameters.
Features administered only for any SBM24 button module are ignored. The feature must be
administered for the deskphone and not the button module.
Primary call appearances, bridged call appearances, and Team Buttons cannot be administered on
softkeys.
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
110
Send All
Redial
Comments? infodev@avaya.com
(blank)
Send All
CM Feature Numbers for Assigning
(blank)
(blank)
June 2014