Avaya 9608 Administrator's Manual page 102

Administering Deskphone Options
Category
TIA LLDP MED
TIA LLDP MED
TIA LLDP MED
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Avaya Proprietary
Basic Mandatory
On receipt of a LLDPDU message, the phones will act on the TLV elements described in the
following table:
Table 12: Impact of TLVs Received by 9600 Series IP deskphones on System Parameter Values
System Parameter
Name
PHY2VLAN
L2QVLAN and L2Q
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
102
TLV Name (Type)
Inventory – Serial
Number
Inventory – Manufacturer
Name
Inventory – Model Name
PoE Conservation Level
Support
Call Server IP Address
IP Phone Addresses
CNA Server IP Address
File Server
802.1Q Framing
End-of-LLDPDU
TLV Name
IEEE 802.1 Port VLAN
ID
IEEE 802.1 VLAN
Name
Comments? infodev@avaya.com
TLV Info String (Value)
Phone serial number.
Avaya.
MODEL with the final D xxx characters removed.
Provides power conservation abilities and settings,
Typical and Maximum Power values.
OUI = 00-40-0D (hex), Subtype = 1.
Call Server IP address.
Subtype = 3.
Phone IP address, Phone address mask, Gateway IP
address.
Subtype = 4.
CNA Server IP address = in-use value from
CNASRVR.
Subtype = 5.
Release 6.2 and later do not support this parameter.
File Server IP address.
Subtype = 6.
802.1Q Framing = 1 if tagging or 2 if not.
Subtype = 7.
Not applicable.
Impact
The value is changed to the Port VLAN identifier in the TLV.
The value is changed to the TLV VLAN Identifier. L2Q will
be set to 1 (ON). VLAN Name TLV is only effective if the
following conditions are met:
• The phone is not registered with the call server.
• Name begins with VOICE (letters are not case-sensitive).
• The VLAN is not zero.
• DHCP Client is activated.
June 2014