Chapter 5: Communication Manager Administration; Call Server Requirements; Call Server Administration; Administering The Ip Interface And Addresses - Avaya 9608 Administrator's Manual

Chapter 5: Communication Manager

Call server requirements

Before you perform administrative tasks, ensure that you have installed the proper hardware and
your call server software is compatible with 9600 Series IP deskphones. Use the latest PBX
software and IP phone firmware.

Call server administration

For call server administration information not covered in this chapter, see the following documents
on the Avaya Support website
• Administering Avaya Aura Communication Manager, 03-300509 for more instructions for
administering an IP phone system on Communication Manager.
For information on the process of adding new phones, see chapter 6,Managing Telephones.
For related screen illustrations and field descriptions, see chapter on Screen References.
• Administration for Network Connectivity for Avaya Communication Manager, 555-233-504 for
more information about switch administration for your network.

Administering the IP interface and addresses

Follow these general guidelines:
• Define the IP interfaces for each CLAN and Media processor circuit pack on the call server that
uses the IP Interfaces screen. For more information, see Administration for Network
Connectivity for Avaya Communication Manager , 555-233-504.
• On the Customer Options form, verify that the IP Stations field is set to Y (Yes). If it is not set to
(Y), contact your Avaya sales representative. This guideline does not apply to the IP
Softphone.
June 2014
Administration
:
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
Comments? infodev@avaya.com
39