Administering Udp Port Selection; Administering Rsvp; Administering Qos; Administering Ieee 802.1Q - Avaya 9608 Administrator's Manual

Communication Manager Administration

Administering UDP port selection

You can administer the 9600 Series IP deskphones from the Avaya Communication Manager
Network Region form to support UDP port selection. For information on specific port assignment
diagrams, see Installing and maintaining Avaya IP Deskphone 9608, 9608G, 9611G, 9621G, and
9641G H.323, 16-603603 for the 9608, 9611G, 9621G, and 9641G deskphones.
Also see Avaya IP Deskphone Edition for 9600 Series IP Telephones, Installation and Maintenance
Guide, 16-300694 for all other 9600 Series deskphone modules.
For information about Avaya Communication Manager implementation, see Administration for
Network Connectivity for Avaya Communication Manager, 555-233-504 on the
website.
Administer the switch to use a port within the proper range for the specific LAN, and the IP
deskphone(s) copy that port. If no UDP port range is administered on the switch, the IP deskphone
uses an even-numbered port, randomly selected from the interval 4000 to 10000.

Administering RSVP

9600 Series Avaya IP deskphones support the Resource Reservation Protocol (RSVP) for IPv4
audio connections only.
You can fully enable RSVP by provisioning CM ip-network-region.
For more information, see your Avaya server administration documentation and Administration for
Network Connectivity for Avaya Communication Manager, 555-233-504.

Administering QoS

The 9600 Series IP deskphones support both IEEE 802.1D/Q and DiffServ. Other network-based
QoS initiatives such as UDP port selection do not require support by the phones. However, they
contribute to improved QoS for the entire network.

Administering IEEE 802.1Q

The 9600 Series IP deskphones can simultaneously support receipt of packets that are tagged, or
not tagged according to the IEEE 802.1Q standard. To support IEEE 802.1Q, you can administer
9600 Series IP deskphones from the network through LLDP, or by appropriate administration of the
DHCP or HTTP/HTTPS servers.
You can administer the IEEE 802.IQ QoS parameters L2QAUD, and L2QSIG through the IP
Network Region form. To set these parameters at the switch, see sections on Quality of Service
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
40
Comments? infodev@avaya.com
Avaya Support
June 2014