Avaya 9608 Administrator's Manual page 33

Destination port
500, 2070, or 4500
1720
The number used in the Source
Port field of RAS packets that are
sent by the phone
As specified by CM, or as reserved
for CNA RTP tests during CNA
registration
The next higher port number if the
port used for RTP is even, or the
next lower port number if the port
used for RTP is odd
The number used in the Source
Port field of registration messages
that are sent by the SLA agent on
the phone
Note:
SLA and CNA not supported in H323 Release 6.3 and later.
Table 5: Transmitted packets (Source = 9600 Series IP deskphone)
Destination Port
7
The number used in the Source
Port field of packets that are
received by the SSH server of the
phone.
53
67
Release 2.0+ = HTTPPORT
Pre-Release 2.0 = 80 unless
explicitly specified otherwise, for
example, use of Port 81 for CM
80 unless explicitly specified
otherwise, for example, in a URL or
because of use of WMLPORT
June 2014
Source port
500 or 4500 Received IKE or IPsec
messages (if NVIKEOVERTCP
is 0 or 1)
Any H.323 signaling messages
1719 H.323 RAS messages
Any Received RTP and SRTP
packets
Any Received RTCP and SRTCP
packets
Any Received SLA registration
messages
Source Port
Any unused port
number
22
Any unused port
number
68
Any unused port
number
Any unused port
number
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
Comments? infodev@avaya.com
Other network considerations
Use
Use
Transmitted Qtest messages
Packets that are transmitted by
the SSH server of the phone
Transmitted DNS messages
Transmitted DHCP messages
Packets that the HTTP client
transmits on the phone during
startup
Packets that the HTTP client of
the phone transmits after
startup, for example, for backup
and restore or push
UDP or TCP?
UDP
TCP
UDP
UDP
UDP
TCP
UDP or TCP?
UDP
TCP
UDP
UDP
TCP
TCP
33