Administering Backup And Restore - Avaya 9608 Administrator's Manual

Administering Deskphone Options
4
Note:
To prevent the condition where both a primary and bridged call appearance (on two separate
deskphones) auto-answer an incoming call, you should use either of the following approaches,
as applicable to your environment:
• Put the deskphones that you want to auto-answer in a GROUP with AUTOANSSTAT set to
1 (or any other applicable value), and put the other deskphones in a different GROUP with
AUTOANSSTAT set to 0. The first Group will auto-answer the call as applicable, and the
second Group will never auto-answer the call.
• Set AUTOANSSTAT to 2 for all deskphones so that only the primary call appearances
auto-answer calls.

Administering backup and restore

9600 Series IP deskphones support the HTTP client to back up and restore the user-specific data
indicated in User data saved during backup
(HTTPS) is also supported for backup or restore. For backup, the deskphone creates a file with all
the user-specific data if a backup file location is specified in system parameter BRURI. The file is
sent to the server by an HTTP PUT message, with appropriate success or failure confirmation.
For restore, the initiating process must supply only the backup file name. The file is requested from
the server by an HTTP GET message. If successful, the file is returned to the initiating process.
Otherwise a failure message is returned.
Backup and restore operations construct the URI used in the HTTP message from the value of the
BRURI parameter and from the file name as follows:
• If BRURI ends with a / (a forward slash), the file name is appended.
• Otherwise, a forward slash and the file name is appended to the BRURI value.
Note:
BRURI can include a directory path and/or a port number as specified in IETF RFCs 2396
and 3986.
If you use TLS, the call server registration password for the phone must be included in an
Authorization request-header in each transmitted GET and PUT method. This is intended for use by
the Avaya IP Telephone File Server Application (which can be downloaded from the Avaya support
Web site) so that the phone requesting the file transaction can be authenticated.
If no digital certificates are downloaded based on the system parameter TRUSTCERTS, the phone
establishes a TLS connection only to a backup/restore file server that has a Avaya-signed
certificate, included by default with the Avaya IP Telephone File Server Application, and includes the
Administering 9608/9608G/9611G/9621G/9641G IP Deskphones H.323
122
Specified and does not match
VDN
on page 124. Release 1.5, onwards, HTTP over TLS
Comments? infodev@avaya.com
(regardless of status such as
Ready, Aux Work, etc.)
No auto-answer on either PCAs or
BCAs.
June 2014