Removing A Memory Module - Sagem 5890dn Print Functions

Push out the clamps on both ends of the memory socket.
Clamp
Remove the memory module from its package. Aligning the cutouts of the
memory module with the matching keys of the socket, carefully plug the
memory module into the memory socket until it clicks in place.
Push the two socket clamps to secure the memory module.
After you finish installing the memory module, close the right cover.

Removing a Memory Module

To remove a memory module, open the right cover and inner cover, then carefully
push out the two socket clamps. Ease the memory module out of the socket to
remove.
Testing the expanded memory
To verify that the memory module is working properly, test it by printing a status page
(refer to see "Printing a Status Page", page 14).
Clamp
Cutouts
4-5
Options