Servicing; Scanner Calibration; Incidents; Communication Errors - Sagem LASER PRO 348 User Manual

Maintenance
For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit
and the transfer roll) has to be done on the printer approximatly every 50,000 printed pages.
Please contact your supplier for this operation.
You can perform this operation when the quality of photocopied documents is no longer
satisfactory.
Insert a blank page into the sheet-fed scanner and press OK to confirm
Remark : Since the page you insert will be used to define the quality of subsequent copies, it must be free from any
visible defects.
I
NCIDENTS
If the communication fails, the fax advises you of an automatic retry later.
Example of what is displayed:
Current time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Transmission from the feeder

You have the choice between:
• waiting until the transmission takes place at the given time
• restarting the transmission immediately by pressing
• abandoning transmission by pressing

Transmission from memory

You have the choice between:
• waiting until the transmission takes place at the given time
S
ERVICING
S
CANNER CALIBRATION
C
OMMUNICATION ERRORS
6-15
M 80 OK - ADVANCED FCT / CALIBRATION
FRI 11 DEC 20:13
0142685014 20:18
. To eject the document, press again