Creating Custom Paper Type - Sagem 5890dn Print Functions

Press
To change overriding mode, press [OK]. A blinking question mark (?) appears.
Press
Press [OK]. The overriding mode is set.
To exit the menu selection, press [MENU].

Creating Custom Paper Type

The following describes the procedure used to set a user-defined paper type for the
printer. Eight custom user settings may be registered. After having been set, any of
these may be called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see "Setting the Paper Weight",
page 60 and "Setting the Duplex Path", page 60). after selecting the paper type to
be customized as follows. For how to reset the customized settings, See "Resetting
the Custom Paper Type", page 3-61.
Press [MENU].
Press
Press
Press
Press [OK]. A blinking question mark (?) appears.
Press
shown below.
- Custom 1 (to 8)
- Plain
- Transparency
- Preprinted
- Labels
- Bond
- Recycled
- Vellum
- Rough
- Letterhead
- Color
- Prepunched
- Envelope
- Cardstock
- Coated
- Thick
- High quality
or repeatedly until >Override A4/LT appears.
or to change Off to On.
or repeatedly until Paper Handling > appears.
.
or repeatedly until >Type Adjust > appears.
or to display the desired paper type. The display changes as
3-59
Using the Operator Panel