Operating The Storage Device; Using The Memory Card - Sagem 5890dn Print Functions

Using the Operator Panel

Operating the Storage Device

The printer supports four types of storage device; CompactFlash card, Microdrive,
USB flash memory, and RAM disk. The CompactFlash card and Microdrive are
installed into the dedicated slots of the printer. The RAM disk is an allocated part of
the printer's memory. If the Microdrive is installed in the printer, the e-MPS function
will be available. For details, See "e-MPS", page 3-18.
The basic operations of each storage device are the same. This section explains the
operation of the memory card.

Using the Memory Card

The printer is equipped with a slot for a memory card. By inserting a memory card
into the printer, the following operations become available.
• Reading Font Data
• Reading Data
• Writing Data
• Deleting Data
• Formatting Memory Card
• Printing a List of Data Namesées
For details about the handling of the memory card, See "Microdrive (Hard Disk)/
CompactFlash (Memory) Card", page 4-6.
Reading Font Data
If a memory card with the font data card is inserted into the slot when the printer is
turned on, the fonts are automatically read into the printer.
Press [MENU].
Press or repeatedly until Memory Card > appears.
Press .
Press or repeatedly until > Read Fonts appears.
Press [OK]. A question mark (?) appears.
Press [OK]. Processing appears and the reading of data from the memory
card starts. When completed, Processing disappears.
Press [MENU]. The display returns to Ready.
3-42