Using Usb Flash Memory - Sagem 5890dn Print Functions

Using the Operator Panel

Using USB Flash Memory

The USB flash memory is available for only PDF file. PDF files should be stored on
the root directory of USB flash memory. The PDF file name can be up to 99
single-byte characters in length.
Note : The file name which is displayed on the message display can be up to 16 charac-
ters.
Installing the USB flash memory into the printer allows you to perform the following
operations.
• Reading PDF file
• Removing the USB flash memory
• Printing a list of data names (partitions)
The operations of the USB flash memory are the same as those of the
CompactFlash card. Refer to the relevant sections in Microdrive (Hard Disk)/
CompactFlash (Memory) Card on page -6.
Removing the USB Flash Memory
Press [Menu].
Press or repeatedly until USB memory > appears.
Press .
Press or repeatedly until >Remove Device appears.
Press [OK]. A question mark (?) appears.
Press [OK]. The display returns to Ready, and you can remove the USB flash
memory.
3-50