Making Default Settings; Default Emulation; Printing Kpdl Errors - Sagem 5890dn Print Functions

Making Default Settings

Using the operator panel, you can set the default for the following items.

Default Emulation

You can change the emulation mode and character code set for the current
interface. The printer is capable of the following emulation modes:
• HP PCL 6 (HP Color LaserJet 8550)
• KPDL3 (compatible with PostScript 3)
The printer can automatically switch between emulation mode depending on the
print job that is received from the computer. To do this, select KPDL (AUTO) in the
following procedure.

Printing KPDL Errors

The printer can print error descriptions when printing error occurs during KPDL
emulation. The default is Off — the printer does not print KPDL errors.
Press [MENU].
Press or repeatedly until Emulation > appears on the message display.
One of the emulation modes appears, indicating the emulation currently in
use.
PCL 6 (default)
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
To change the default emulation, press [OK]. A blinking question mark (?)
appears.
Press or repeatedly until the Network appears. Press [OK].
Press [OK].
Press [MENU]. The display returns to Ready.
Press [MENU].
Press or repeatedly until Emulation > appears.
Press [OK]. A blinking question mark (?) appears.
Select KPDL or KPDL (AUTO) using or
3-31
Using the Operator Panel