Duplex Printing Error Detection Setting; Printing The Service Status Page - Sagem 5890dn Print Functions

Duplex Printing Error Detection Setting

If the error detection setting for duplex printing has been turned On, and you attempt
to print onto a paper size and paper type that cannot be used for duplex printing, the
Duplex disabled Press GO error message will be displayed and printing will stop. To
print onto one-side of the paper only when this message is displayed, press [GO].
The default setting is Off.
Press [MENU].
Press
Press .
Press
Press
Press [OK]. A blinking question mark (?) appears.
Press
Press [OK].
Press [MENU]. The display returns to Ready.

Printing the Service Status Page

The service status page contains printer settings information that is more detailed
than the standard status page and is therefore mostly for service purposes.
However, there is a great deal of information on the service status page that may be
useful to you.
Press [MENU].
Press
Press
Press
Press
Press
Press[OK]. A question mark (?) appears.
Press [OK]. The display indicates Processing and printing starts.
or repeatedly until Others > appears.
or repeatedly until >Finishing Error > appears.
and display >>Duplex.
or to change Off to On.
or repeatedly until Others > appears.
.
or until >Service > appears.
.
or repeatedly until >>Print Status Page appears.
3-69
Using the Operator Panel