Changing The Default Font Size - Sagem 5890dn Print Functions

Selecting Regular or Dark Courier/Letter Gothic
Courier or Letter Gothic font thickness can be selected as Regular or Dark. In the
procedure below, it is assumed that Courier is selected. The procedure is the same
for Letter Gothic.
Press [MENU].
Press or
Press . Press
Make sure that Internal is displayed and press .
Press or
the Letter Gothic font, choose >> Letter Gothic here instead.
Press [OK]. A blinking question mark (?) appears.
Select Regular or Dark using
Press [OK].
Press [MENU]. The display returns to Ready.

Changing the Default Font Size

You can change the size of the default font. If you selected a proportional font, the
character size can also be changed.
Press [MENU].
Press or
Press . Press
Make sure that Internal is displayed and press .
Press or
Press [OK]. A blinking cursor (_) appears.
Press or
font size can be set between 4 and 999.75 points, in 0.25-point increments.
Use or to move the cursor right and left.
When the desired size is displayed, press [OK].
Press [MENU]. The display returns to Ready.
until Font > appears.
or until >Font Select > appears.
until >>Courier appears. If you are selecting the thickness of
or
until Font > appears.
or until >Font Select > appears.
until >> Size appears.
to increase or decrease the value at the blinking cursor. The
3-33
Using the Operator Panel
.