Setting The Error Clear Time - Sagem 5890dn Print Functions

Using the Operator Panel
• Multiple copies are not printed
• Illegal account
• Exceeded Max. out
• Account error
• USB memory error
Note : For setting the auto error clear recovery time, see the next section.

Setting the Error Clear Time

Press [MENU].
Press or repeatedly until Others > appears.
Press .
Press or repeatedly until >Auto Error Clear > appears.
Press [OK]. A blinking question mark (?) appears.
Select On or Off using
Press [OK].
To exit the menu selection, press [MENU]. The display returns to Ready.
Press [MENU].
Press or repeatedly until Others > appears.
Press .
Press or repeatedly until >Auto Error Clear > appears.
Press and display >>Error Clear Timer. The default setting is 30 seconds.
Press [OK]. A blinking cursor (_) appears.
Press or increase or decrease the value at the blinking cursor and set
the desired time. The time must be set between 000 and 495 seconds, in
5-second increments. If set to 000, printing will be continued immediately
without any time interval. You can use
left.
Display the desired time and press [OK].
Press [MENU]. The display returns to Ready.
or .
and
3-68
to move thecursor right and