Using the Operator Panel
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be customized.
Setting the Duplex Path
You can set whether or not to enable duplex printing as follows. The default setting
is Enable.
When the paper type to be customized is displayed, press [OK].
The priority mode is set.
Press
and proceed to Setting the Paper Weight.
Display the custom paper type (See "Creating Custom Paper Type",
page 3-59) and press .
Press
or
repeatedly until >>Paper Weight appears.
Press [OK]. A blinking question mark (?) appears.
Press
or
to display the desired paper thickness. The display changes
as shown below. For details of the default setting for each paper type, See
"Paper Availability", page 2-2.
- Light
- Normal 1
- Normal 2
- Normal 3
- Heavy 1
- Heavy 2
- Heavy 3
- Extra Heavy
When the desired paper thickness is displayed, press [OK].
Press [MENU]. The display returns to Ready.
Display the custom paper type (See "Creating Custom Paper Type",
page 3-59) and press
Press
or
repeatedly until >>Duplex path appears.
Press [OK]. A blinking question mark (?) appears.
Select Enable or Disable using
each paper type, See "Paper Availability", page 2-2.
Press [OK].
Press [MENU]. The display returns to Ready. The custom paper type setting
is completed.
.
or
. For details of the default setting for
3-60