E-Mps - Sagem 5890dn Print Functions

Using the Operator Panel

e-MPS

e-MPS is an abbreviation for enhanced-Multiple Printing System which implements
the following functions that are available from the printer driver:
• Job Retention
• Job Storage
In either job mode, when printing a document, the print data is transferred from the
computer to the printer then stored on the printer's hard disk.
Since copies of the document are printed using the stored data, printing is performed
faster with less computer spooling time and less network traffic.
Note : To use the e-MPS system, an optional hard disk must be installedin the printer. For
details, See "Microdrive (Hard Disk)/CompactFlash (Memory) Card", page 4-6
The RAM disk may also be used in the Proof-and-Hold and Private Print modes. See
"Using the RAM Disk", page 3-48 for details on RAM disk setup.
Job Retention
Job Retention has four modes as summarized below. These modes are selected
from the printer driver through the application software:
Primary function
Start storing by
On terminating
print setting from
application
software
Retrieved by
Default number of
copies printed at
retrieval
Maximum number
of jobs stored†
PIN security
Data after printing Stored
Data at power off
†. Jobs in excess will cause the earlier ones to be deleted.
Quick Copy Proof-and-Hold
To proof the first
To later print copy before
additional copies printing multiple
copies
Printer driver Printer driver
Prints Prints one copy
simultaneously simultaneously
Operator panel Operator panel
Same as storing One less (can be
(can be changed) changed)
32, expandable to 32, expandable to
50 50
No No
Stored
Deleted Deleted
Private Print
To hold the
document in
printer to prevent
unauthorized
access
Printer driver
Does not print
Operator panel
Same as storing
(can be changed)
Depends on the
hard disk capacity
Yes
Deleted
Deleted
3-18
Stored Job
To electronically
store documents
such as fax cover
pages
Printer driver
Does not print
Operator panel
One (can be
changed)
Depends on the
hard disk capacity
Yes (if necessary)
Stored
Stored