Deleting Data; Formatting A Memory Card - Sagem 5890dn Print Functions

Deleting Data

It is possible to use the printer to delete data from a memory card.
Check that the memory card contains data. Otherwise, the >Delete Data menu will
not appear on the message display.
Press [MENU].
Press
Press
Press
appears (Report, in this example).
Press [OK]. A blinking question mark (?) appears before the data name.
Press
Press [OK]. Processing appears and the data is deleted from the memory
card. The display returns to Ready.

Formatting a Memory Card

A new memory card must be formatted before it can be used in the printer.
Formatting allows data to be written to the memory card.
Note : Formatting will destroy any existing data on a storage device including a used
memory card. Formatting of the memory card must be executed from the printer.
When a new memory card is inserted in the printer's slot, Format error Memory card
will appear on the message display.
Press [MENU].
Press
Press
Press
Press [OK]. A question mark (?) appears.
Press [OK]. Processing appears and formatting of the memory card starts.
When the formatting is successfully completed, the printer automatically prints
out a format information page, which allows you to check the memory card for
proper formatting.
or repeatedly until Memory Card > appears.
.
or repeatedly until >Delete Data appears. The data name also
or to display the desired data name.
or repeatedly until Memory Card > appears.
.
or repeatedly until >Format appears.
3-45
Using the Operator Panel