Automatic Form Feed Timeout Setting; Setting The Sleep Timer - Sagem 5890dn Print Functions

Using the Operator Panel

Automatic Form Feed Timeout Setting

If the printer receives no data for a certain period, it will time out and release the
current interface. It prints whatever data it has in its buffer and feeds out the page.
The default form feed timeout time is 30 seconds.

Setting the Sleep Timer

The printer has a sleep timer that is used to conserve power when the printer is not
printing, processing, or receiving data.
Press [MENU].
Press or repeatedly until Others > appears.
Press .
Press or repeatedly until >Form Feed Time Out appears.
To change the timeout time, press [OK]. A blinking cursor (_) appears.
Press ou to increase or decrease the value at the blinking cursor and
set the desired time. The timeout time can be between 0 and 495 seconds, in
5-second increments. Use
When the desired timeout time is displayed, press [OK].
To exit the menu selection, press [MENU].
Press [MENU].
Press or repeatedly until Others > appears.
Press .
Press or repeatedly until >Sleep Timer > appears.
Press display >>Auto Sleep.
To turn off the sleep timer, press [OK]. A blinking question mark (?) appears.
Press or pto change On to Off.
Press sur [OK]. The sleep timer is turned off.
To exit the menu selection, press [MENU].
and to move the cursor right and left.
3-64