Geographical Settings; Local Prefix - Sagem MF 5890DN User Manual

Setting your machine

Geographical settings

These settings will enable you to use your machine in different preset countries using different
languages.
Country
By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
Select the required option and press the OK key to confirm.
Network
This setting enables you to individually set the type of public telephone network so that your
machine can communicate over the public network of the country you have chosen in
compliance with the applicable standards.
Note: these settings are different from the NETWORK TYPE ( p. 3-2), which allows you to choose between
public and private network.
To select the network:
Select the required option and press the OK key to confirm.
Language
This setting enables you to choose a language other than that imposed by the
setting.
To select the language:
Select the required option and press the OK key to confirm.

Local prefix

This function is used when your fax is installed with a private network, behind a company's
PABX. It allows you to program an additional automatic local prefix (to be defined), enabling
you to automatically exit the company's telephone network system, but only under certain
conditions:
• the company's internal numbers, where a prefix is not required, must be short numbers less
than the minimal size (to be defined, for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers greater or equal to the mini-
mal size (to be defined, for example France has 10 digits).
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
202 OK - SETUP / GEOGRAPHICAL / NETWORK
203 OK - SETUP / GEOGRAPHICAL / LANGUAGE
3-3
COUNTRY