Mediaport 200 Web Page; Accessing The Web Page - Extron electronics MediaPort 200 User Manual

MediaPort 200 Web Page

The embedded MediaPort 200 Web page enables monitoring and adjustment certain
settings of the MediaPort 200 through its Ethernet port, connected via a LAN or WAN and
using a Web browser such as Microsoft
is always available and cannot be erased or overwritten.
NOTE: If the Ethernet connection to the MediaPort is unstable, try turning off the proxy

Accessing the Web Page

1.
2.
3.
server in the Web browser. To do this in Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN Settings
proxy server... checkbox, then click
In the Address field of the Web browser, enter the IP address of the unit. To obtain this
address, either of the following can be done:
Press the front panel Menu button until the View Comm Settings menu is displayed
•
in the LCD window, then press
Enter the SIS command
•
information).
NOTE: If the local system administrators have not changed the IP address, use
the factory-specified default
Press the < > key. The MediaPort checks to see if the Web page is password
Enter
protected.
If the unit is not password protected, the Web page opens.
•
If the unit is password protected, the
•
opens.
Figure 93. Authentication Required Dialog Box
If an administrator or user password is required, enter the user name (
in the field and the password in the
User Name
Internet Explorer . This factory-installed Web page
® ®
.
OK
until the IP address is displayed.
Next
E }
(see SIS Commands
CI
192.168.254.254
Authentication Required
Password
MediaPort 200 • Remote Configuration and Control
, clear the Use a
on page 112 for more
in this field.
dialog box
, by default)
admin
field. Click .
Log In
149