Mediaport 200 Web Page; Accessing The Web Page - Extron electronics MediaPort 200 User Manual

MediaPort 200 Web Page

The embedded MediaPort 200 web page enables monitoring and adjusting certain settings
of the MediaPort 200 through its Ethernet port, connected via a LAN or WAN and using
a web browser such as Microsoft
always available and cannot be erased or overwritten.
NOTE: If the Ethernet connection to the MediaPort is unstable, try turning off the proxy

Accessing the Web Page

To access the HTML page:
1.
2.
3.
server in the web browser. To do this in Microsoft Internet Explorer, click
>
Tools Internet Options
checkbox, then click
server...
In the field of the web browser, enter the IP address of the unit. To obtain this
Address
address, either of the following can be done:
Press the front panel
• Menu
in the LCD window, then press
Enter the SIS command E
•
information).
NOTE: If the local system administrators have not changed the IP address, use the
factory-specified default
Press the <Enter> key. The MediaPort checks to see if the web page is password
protected.
If the unit is not password protected, the web page opens.
•
If the unit is password protected, the
•
opens.
Figure 94. Example of a Network Password Dialog Box
If an administrator or user password is required, enter the user name (
in the field and the password in the
User Name
Internet Explorer . This factory-installed web page is
® ®
> >
Connections LAN Settings
.
OK
button until the
View Comm Settings
until the IP address is displayed.
Next
} (see SIS Commands
CI
in this field.
192.168.254.254
Authentication Required
Password
MediaPort 200 • Remote Configuration and Control
, clear the
Use a proxy
menu is displayed
on page 112 for more
dialog box
, by default)
admin
field. Click .
Log In
141