Table of Contents
Advertisement
Web Page Idle (Timeout)
To conserve the host computer resources (memory, bandwidth), if you leave the browser
page idle, after about 60 minutes, the SMD 101 web interface stops requesting status and
video confidence updates. An Idle dialog box opens.
Figure 15.
This idle status does not affect the output AV stream, which continues unaffected no matter
what state (active or idle) the web pages are in.
Click Resume to reconnect the web page to the live feed from the SMD 101. In a moment,
the browser refreshes the view, and the status updates and video confidence display
resume.
Logging Out and Logging In
If a password is active, you must log in to the appropriate account using the password to
access the SMD 101. Additionally, before you can change roles (from administrator to user,
or user to administrator) or user accounts, you must log out of the SMD 101 embedded
web pages. The user or administrator status is displayed in the upper right corner of all web
pages (see figure 16):
Figure 16.
NOTES:
If no password is active, anyone connecting to the SMD 101 is automatically logged in as
the administrator.
To log out of the SMD 101 web pages:
1.
Web Page Idle Dialog
Logged in Status and Logout Button
•
The factory configured passwords for all accounts on this device have been set to
the device serial number.
•
In the event of a device reset, depending on the reset type, the password reverts to
the original password configuration, which is no password. See
Summary
on page 136 for more information
From any SMD 101 embedded web page, click Logout above the navigation bar.
A Logout dialog box opens (see figure 17).
Figure 17.
Logout Dialog
SMD 101 Reset
SMD 101 • Web-based User Interface
19
Advertisement
Table of Contents
