Internal Web Page; Accessing The Web Page - Extron electronics IN1804 Series User Manual

Internal Web Page

The IN1804 Series scalers feature an internal web server, displayed as a web page. This
page allows you to monitor and adjust certain settings of the IN1804 via a LAN or WAN
connection. Use a web browser to view the pages on a PC connected to the scaler LAN
port.
NOTE: The scaler internal web page does not support compatibility mode in Microsoft
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•

Accessing the Web Page

1.
2.
3.
4.
5.
6.
Internet Explorer (see Disabling Compatibility Mode
®
recommends using Mozilla
®
Accessing the Web Page
Web Page Components
Connect the scaler to a LAN or WAN using the rear panel RJ-45 LAN connector (see
figures 4, 5, and 6, , on page 11).
G
Open a web browser on a connected PC.
Enter the IP address of the device in the browser
NOTE: The default IP address is 192.168.254.254.
Press the < > key on the keyboard.
Enter
The scaler checks if the device is password-protected.
If the device is not password-protected, the web pages open.
•
If the device is password-protected, enter a user name entry (
•
field and the password in the
User Name
Figure 45. Example of a Network Password Dialog Box
Click the button.
OK
IN1804 Scaling Presentation Switcher • Internal Web Pages
Firefox or Google Chrome™.
®
Address
Password
on the next page). Extron
field.
or ) in the
user admin
field when prompted.
®
90