Picture Controls; Adjusting The Picture Controls - Extron electronics DVS 510 User Manual

Picture Controls

The DVS has six picture control buttons located on the front panel to the right of the PIP
buttons. You can use these buttons to adjust size, position, brightness and contrast,
color and tint, detail, magnification (zoom), and select a portion of the image on which to
focus the view (pan). (See the
explanation of these button functions.)
NOTE: When PIP mode is active, all these picture controls apply to the PIP window. To

Adjusting the Picture Controls

To adjust the picture controls for the currently selected input:
1.
2.
3.
4.
NOTE: The LCD screen displays N/A in place of a value if that adjustment does not
Picture Controls Summary
configure the main window, press the PIP On/Off button to exit PIP mode.
Press the button for the input that you want to adjust. If you want to adjust the PIP
window, press the PIP On/Off button to enter PIP mode, then press the button for
the PIP input.
Press the desired picture control button: Size, Bright/Cont (brightness and
contrast), DETAIL (sharpness), Position (centering), Color/Tint (color quality), or
Zoom/Pan (magnification or horizontal and vertical panning).
Rotate the horizontal ( [ ) and vertical ( { ) ADJUST knobs to select a level from the
available range.
Repeat steps 1 through 3 for each image adjustment you want to make for the selected
input.
apply to the video format of the input.
table on the next page for an
DVS 510 Series • Operation 37