Exit Menu; Picture Controls - Extron electronics PIP 422 User Manual

im Vertrieb von
Operation, cont'd

Exit menu

From the Exit menu (figure 3-9), press the Next button to return to the default
display cycle, or press the Menu button to return to the Input Configuration menu.
NOTE
Figure 3-9 — Exit menu flowchart

Picture Controls

The picture adjustments allow you to fine tune the image quality of the selected
window. When you press one of the Picture Control buttons (Color/Tint,
Brightness/Contrast, Detail (filter), Position, Size, or Zoom), the corresponding
picture adjustment menu for the selected window appears in the LCD (figure 3-10).
For Position, Size, and Zoom, press the button again, and the corresponding image
adjustment menu for the image within the window appears. In either screen,
adjustments can then be made by rotating the Adjust
Picture control settings are stored in nonvolatile memory; when the processor is
powered down and then powered up, the settings are restored.
When a window or image adjustment is selected, the window that is selected for
adjustment by using the Window Select button is indicated on the displayed image
by a blinking border. Borders on the unselected windows are temporarily turned off.
www.camboard.de
3-10 PIP 422 and PIP 444 Picture-in-Picture Processors • Operation
CAMBOARD Electronics
Default
Cycle
Menu
The PIP returns to the last active
main menu or submenu when
you press Menu.
Input
Config
Menu
Output
Config
Menu
Advanced
Config
Menu
Genlock
Config*
Menu
Menu
To exit menu
press NEXT
Next
See Auto-center the image on page 3-12 to automatically center the image
within the active window.
Tel. 07131 911201
Fax 07131 911203
20 sec.
Default
Next
Cycle
*PIP 444 only
knob or Adjust
ce-info@camboard.de
knob.