Picture Controls Submenu - Extron electronics IN1804 Series User Manual

Picture Controls Submenu

Figure 19.
The
Picture Controls
NOTE: When the aspect ratio changes as a result of
entered, the
Auto-Image — Press the
•
to restore it to the default size and position. Auto-Image updates horizontal and vertical
image position, and horizontal and vertical image size settings.
NOTE: The auto-Image submenu is the same as the standard Auto Image
SIS command. However, there are other Auto-Image options available through SIS
commands (see the
IN1804 Series PCS Help File). The options include to execute an Auto-Image and
fill the output and to execute an Auto-Image and maintain the input aspect ratio.
These commands ignore the current aspect mode setting, auto-image the input,
and then select
The following is performed during an Auto-Image when the aspect ratio is set to
•
Fill
•
•
The following is performed during an Auto-Image when the aspect ratio is set to
•
Follow
The horizontal and vertical image position and image size are set to maintain the
•
native aspect of the input rate with regard to the current output resolution.
Set the aspect ratio on the
Picture Controls Submenu
submenu adjusts picture settings.
and
Image Position Image Size
button to execute an Auto-Image on the active input,
Enter
Auto-Image SIS commands
or
Fill Follow
:
Horizontal and vertical image positions return to
Horizontal and vertical image sizes match the current output resolution.
:
Advanced
IN1804 Scaling Presentation Switcher • Operation
or
Fill Follow
values are updated accordingly.
on page 59 or PCS (see the
.
.
0000
submenu (see INn: Aspect Ratio
commands being
Execute
on page 39).
28