dC371 Configuration Page
Purpose
Allows easy viewing and set-up of machine configuration.
Procedure
1.
Enter the Diagnostic Mode. Refer to
2.
Select Adjustments on the Service Entry Screen.
3.
Select NVM Init, S/R (the default screen).
4.
Select Configuration Page (dC371). The Configuration Page Screen is displayed.
5.
Make selections on the screen from the following categories:
a.
Market Place
•
XC (NASG)
•
XE (ESG)
•
FX
•
FX / AP
b.
Machine Config
•
Digital Copier
•
Copier / Printer
•
Copier / Printer / Scanner
•
Printer with UI
c.
Output Device(s)
•
Simple Catch Tray
•
Offsetting Catch Tray
•
Finisher
d.
Input Device
•
DADF
•
Platen Only
6.
Select Save to save the options or select Reset to reset the default settings back to origi-
nal options prior to entering Configuration Page (dC371).
Initial issue
DC 3535/2240/1632, WC M24
Entering Diagnostic Mode using the
PWS.
dC527 DADF Document Calibration
Purpose
NOTE: For details on dC527 DADF Document Calibration, see Adjustments Section 4:
5.6.
09/03
6-115
ADJ
General Procedures and Information
dC371, dC527