Equipment Available; General Specifications - Garmin G3X Installation Manual

15.1.1 Status LED
The GSA 28 has an LED on its outer case that indicates its current status. See

15.2 Equipment Available

Model
GSA 28 Servo Actuator, Unit Only

15.3 General Specifications

Characteristic
Height
Depth
Weight
*Harness connector not included
**Accessories not included
15.3.1 Power Specifications
The trim outputs are capable of sourcing a maximum of 1 Amp of current to drive a brushed DC motor.
The trim outputs drive a maximum output voltage of 12 Vdc.
CAUTION
The GSA 28 is compatible with 14 Vdc trim systems only. Do not connect the GSA 28 to a
28 Vdc trim system.
Supply Voltage
14 Vdc without Auto-trim
28 Vdc without Auto-trim
14 Vdc with Auto-trim
15.3.2 Torque Specifications
Characteristic
Maximum Rated Torque
190-01115-01
Rev. AA
Table 15-1 GSA 28 Part Numbers
Assembly Part Number
010-01068-00
Table 15-2 General Specifications
Width
Table 15-3 GSA 28 Power Specifications
Table 15-4 GSA 28 Torque Specifications
G3X/G3X Touch Installation Manual - GSA 28 Installation
Section 33.1.1
Unit Only Part Number
011-02927-00
Specification
4.0 inches (10.16 cm)
2.5 inches (6.35 cm)
2.8* inches (7.11 cm)
1.40** lbs, (0.635 kg)
Current Draw
0.36 Amp (typical), 1.80 Amp (max)
0.20 Amp (typical), 1.00 Amp (max)
0.36 Amp (typical), 2.80 Amp (max)
Specification
60 in-lbs
for details.
Page 15-2