Garmin G3X Installation Manual page 708

32.4.17 Sound Configuration Page
The Sound Configuration Page allows setting the parameters for various alert and message tones. A TEST
softkey is used to test audio volume and configuration.
1. In configuration mode, use the Touch Panel or a Move Selector Knob to select the Sound
Configuration Page.
2. Use the Touch Panel or a Move Selector Knob to select the desired configurable item and make the
desired selection.
3. Enter data (where applicable) using the Keyboard
4. Press the Back key to return to the Configuration Mode page when finished (if desired).
The configuration options for the Sound Configuration Page are listed/described as follows:
Alert Volume–Controls the volume level (settings 0%-100%) of audio alerts (Altitude, CAS, Integrated
Autopilot, Terrain, Traffic)
Message Volume–Controls the volume level (settings 1-10, or OFF) of message tones (Airspace Advisory
Messages, Approaching VNAV Target Altitude Message, etc.)
Terrain Audio–Enables/disables terrain awareness audio alerts
Traffic Audio–Enables/disables Traffic Audio alerts
Traffic N/A Alert–Enables/disables Traffic Not Available alerts
AOA Alert–Enables/disables AOA Alert tone
Altitude Alert–Enables/disables the Altitude Alert tone
Minimums Alert–Enables/disables the Altitude Minimums tone
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA
(Section 32.4.1) or Slider Bar (Section 32.4.2).
Page 32-113