NOTE
There are two plugs on a Slick/Unison 43xx series magneto where the tach sender could
fit. The one closest to the rotating magnet, with the hex-shaped plug, is correct. The one on
the opposite side, with a round plug, is incorrect.
CORRECT TACH SENSOR PORT
WRONG PORT
Figure 21-15 Plugs on Slick/Unison 43XX Magneto
190-01115-01
Rev. AA
Figure 21-16 Magneto Tach Sensor Installed
G3X/G3X Touch Installation Manual - Engine/Airframe Sensor Installation
CORRECT TACH
SENSOR PORT
WRONG PORT
Page 21-24