Garmin G3X Installation Manual page 660

c) Press the Autopilot button.
d) Select Roll Servo and set the Max Torque.
e) Select Pitch Servo and set the Max Torque.
16. Engage the autopilot and verify that it properly disconnects with a short press and release of the
CWS/DISCONNECT button.
a) If the audio output of the G3X system is connected to the aircraft audio system, verify the
pilot hears an autopilot disconnect tone when disconnecting the autopilot.
190-01115-01 G3X/G3X Touch Install Manual - GDU 45X/46X Config and Post Install Checkout
Rev. AA Page 32-65