Figure 31-35 GSU 73 Engine/Airframe Input Configuration Page
For factory-installed systems, the Engine/Airframe Input Configuration section is replaced with an EIS
Configuration page that allows access to calibration functions and time adjustments, but does not allow
changing EIS configuration values. See
Section 31.4.18.4
for calibration information.See also
Engine
Time Configuration
and
Total Time
information.
Figure 31-36 EIS Configuration Page
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AA
Page 31-114