3. Press the Calibrate softkey when in compliance with the onscreen instructions.
4. Verify that the calibration is successful, then press the Done softkey when finished.
5. Proceed to
Stall Warning AOA
NOTE
After calibrating all required AOA points, if the AOA caution alert and audio warning
occur too frequently or not frequently enough, the Caution Alert AOA calibration step can
be repeated to set a new value.
190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AA
Calibration.
Page 31-81