Siemens HiPath 5000 Service Manual page 1123

C.3 HiPath ComScendo Service
Table C-3 HiPath ComScendo Service - IP Protocols and Port Numbers Used
Service/ Proto-
Application col
H.225 RAS TCP
H.225 Call TCP
Signaling
H.323 Dy- TCP
namic Ports
VOPTISET TCP
IPNC TCP
SNMP (Get/ UDP
Set)
SNMP UDP
(Traps)
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
IP Protocols and Port Numbers Used with HiPath 3000/5000 V6.0
Server Connect
Port With Oth-
er Servers
1719 –
1720 X
12250 - X
12950
4060 –
12051 –
161 –
162 X
Possible Cli- Application
ents
Netmeeting, Voice over IP: reg-
AP 1120 istration, admis-
sion
HG 1500, Voice over IP:
optiPoint 400, connection control
optiPoint 410,
optiPoint 420,
optiPoint 600,
optiClient 130,
Netmeeting,
AP 1120
HG 1500, Voice over IP:
optiPoint 400, connection control
optiPoint 410, for voice channels
optiPoint 420, (media channels)
optiPoint 600,
optiClient 130,
Netmeeting,
AP 1120
optiPoint 400, Voice over IP:
optiPoint 410, control of system
optiPoint 420, clients
optiPoint 600,
optiClient 130
HG 1500 Voice over IP: me-
dia gateway con-
trol
SNMP brows- SNMP browser,
er, HiPath FM HiPath FM
optiPoint 400, Sending/receiving
optiPoint 410, SNMP error mes-
optiPoint 420, sages
optiPoint 600,
optiClient 130
portnos.fm
HiPath ComScendo Service
Config-
urable
Yes
Yes
Yes
Yes
Yes
No
No
C-5