Siemens HiPath 5000 Service Manual page 1080

pcodes.fm
System Programming Codes (Expert Mode Codes)
Table A-3 Expert Mode Codes
Code
27 2
27 3
27 4
27 5
27 6
27 7
27 8
27 9
28
28 1
28 2
28 2 1
28 2 2
29
29 1
29 1 1
29 1 2
29 2
29 2 1
29 2 2
29 2 3
29 2 4
29 2 5
29 3
A-22
Destination station no.; select sensor 1 - 4
External station with seizure code (trunk/direction)
Internal station with station prefix (if programmed)
Station no. for announ.; select sensor 1 - 4 and enter station or group
number (max. 6 digits)
Infobox control data; select sensor 1 - 4 and enter control characters 0 -
9, *, #, max. 24 digits
Call duration; select sensor 1 through 4 and enter 1 to 255
Call pause; select sensor 1 through 4 and enter 0 to 255
Number of rings; select sensor 1 through 4 and enter 1 to 255
Block time; select sensor 1 through 4 and enter 0 to 255
Sensor text; select sensor 1 to 4, enter alphanumeric text of up 16 char-
acters (optiset E memory and optiPoint 600 office only)
Edit CDB (HiPath 3750/HiPath 3550/HiPath 3700/HiPath 3500 only)
Print CDB data
Save CDB data
CDB to MMC
CDB from MMC
System details
System
System type (for verification purposes only)
SWversion (for verification purposes only)
Status Display
Call forwarding, external, 0 = Off, 1 = On (for verification purposes only)
Night service, 0 = Off, 1 = On (for verification purposes only)
Trunk, 0 = Inactive, 1 = Active (for verification purposes only)
Ping, 1 = IP address, 2 = Start
MAC address
Options (HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 only)
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Function
P31003-H3560-S403-54-7620, 09/05